Using Violet Wand Internal Electrodes

We are the only violet wand company in North America making internal violet wand electrodes, and we  have been producing them since 2003.  We make them out of a medical grade quartz glass* which is stronger than some glass dildoes on the market.  In fact, we drop them from waist-high to demonstrate their strength.  We also build in a fail-safe breaking point at the stem end of our internals, so that JUST in case there is too much sideways pressure placed on the electrode, it will break at the end cap inside the wand’s nose before it will ever break anywhere where it could injure someone.

Here’s the fun part!! And the Important part!  What do they feel like??

By themselves the internal electrodes produce a warming or vibrating sensation when used internally.  Some people say it feels like bees with a continual warm buzz.  And using 2 or more condoms will get you the decent spark all the way up to the electrode’s full output, above and beyond the vibrating sensation that is produced without a condom.   So you can get a full spark from your internal electrode by using condoms.

Used vaginally, violet wand internal electrodes have proven orgasmic, causing many women to ‘squirt’.  Used anally, the sensations are reported as not as strong as when used vaginally.  But of course this depends upon the sensitivity of the user.

Internal violet wand electrodes are tested safe for use with 8 years of ecstatically happy users.

The electricity can dry out tissues quickly, so use plenty of lube and check frequently.  Use a water based lube (no alcohol!), and you can chill or warm your glass violet wand internal electrodes as you wish.  Clean with soap, bleach or alcohol, or you can even scald them by dipping in boiling water while holding onto the endcap. 

Many hundreds of violet wand users love our internals.  Check out www.wiredpussy.com…those are our own internal electrodes all over…to see them in use and get plenty of evil ideas.

————————————————————–
*12,000 pounds per square inch breaking strength, edge pressure

Leave a Reply