Violet Wand Advanced Systems

The HEL Handle is part of the Mjolnir advanced violet wand system. It works in conjuction with the LOKI cable to deliver full-strength violet wand current over distance while fully insulated the circuit from the Top, taking the top completely out of the electrical circuit, and opening wide ranges of new techniques.

The HEL handle attaches to the LOKI cable which plugs into the violet wand.

The HEL handle has OUR universal violet wand electrode collet.  Our collet accepts all electrodes from 11mm-7/16"-through 12mm and everything in between.  This means it will accept 99% of electrodes that you can find anywhere.

The HEL handle has NO KICKBACK.  It completely isolates you from violet wand current when you hold it.

Put your violet wand down.  Plug in the LOKI cable, attache the HEL handle.  Then insert your electrodes into the HEL handle and use them direct on your subject.

• because you're holding the HEL handle instead of the violet wand not moving your violet wand around, it will not suffer changes in output or shut off because you want to reach down.  Use the handle with the electrode to reach down.  or up. 
• because you're holding the HEL handle instead of the violet wand, you have more freedom of movement.  The handle weighs only 4 ounces and is smaller.  Get it in closer, move it toward tight spots.
• because you're holding the HEL handle instead of the wand, you can set it down and pick it up again without kickback.
• because you're holding the HEL handle instead of your wand, you can use any electrode in the HEL handle's universal collet.
• because you're using the HEL handle instead of your wand, electrode changeout is easier, done in the handle, meaning less wear on your wand.

Put your violet wand down so that you can use it in brand new ways for new realms of sensation.

While the LOKI cable carries the violet wand spark full strength, the HEL handle is an attachment to the LOKI that requires a connection, and some loss in output through the connection is normal, inherent with electrical current, and expected as it passes through the connectors of the handle and exits the HEL handle.

Results with MJOLNIR system toys and accessories, and metal electrodes will not vary, as the HEL handle is designed specifically for the MJOLNIR system tools and advanced use.

Output effects using the HEL handle with glass electrodes of different types, different vacuum levels, different glass thicknesses, and made by different manufacturers may vary.  For use primarily with glass electrodes by all manufacturers, that is more consistent across all glass electrodes by all manufacturers, you may wish to choose the ISA  one-piece integrated Cable with its attached handle.